Ecole publique d’ingénieurs
Membre fondateur du Groupe INSA
Habilitation maximale de la CTI
Label EUR-ACE

Articles de revues internationales à comité de lecture

 

 

 

Reversion of a parent {130}<310> alpha’’ martensitic twinning system at the origin of {332}<113> beta twins observed in beta metastable titanium alloys
P. CASTANY, Y. YANG, E. BERTRAND, T. GLORIANT
Physical Review Letters, accepté

 

TEM quantitative characterization of short-range order and its effects on the deformation micromechanims in a Ti-6Al-4V alloy
P. CASTANY, F. PETTINARI-STURMEL, J. DOUIN, A. COUJOU
Materials Science and Engineering A, accepté
Lien vers la publication

 

Design of a novel superelastic Ti-23Hf-3Mo-4Sn biomedical alloy combining low modulus, high strength and large recovery strain
M.F. IJAZ, D. LAILLE, L. HERAUD, D.M. GORDIN, P. CASTANY, T. GLORIANT
Materials letters, vol 177, pp.39-41, 2016
Lien vers la publication

 

Deformation mechanisms and biocompatibility of the superelastic Ti-23Nb-0.7Ta-2Zr-0.5N alloy
P. CASTANY, D.M. GORDIN, S.I. DROB, C. VASILESCU, V. MITRAN, A. CIMPEAN, T. GLORIANT
Shape Memory and Superelasticity, vol 2, pp.18-28, 2016 (Article invité)
Lien vers la publication

 

Deformation twinning in the full-alpha"  martensitic Ti-25Ta-20Nb shape memory alloy
E. BERTRAND, P. CASTANY, Y. YANG, E. MENOU, T. GLORIANT
Acta Materialia, vol 105, pp.94-103, 2016
Lien vers la publication

Surface Characterization, Corrosion Resistance and in Vitro Biocompatibility of a New Ti-Hf-Mo-Sn alloy
R. ION, S.I. DROB, M.F. IJAZ, C. VASILESCU, P. OSICEANU, D.M. GORDIN, A. CIMPEAN, T. GLORIANT 
Materials 9, 818, 2016

Nitride coating enhances endothelialization on biomedical NiTi shape memory alloy
R. ION, C. LUCULESCU, A. CIMPEAN, P. MARX, D.M. GORDIN, T. GLORIANT 
Mater. Sci. Eng C, 62, pp.686-691, 2016

 

In situ synchrotron X-ray diffraction study of the martensitic transformation in superelastic Ti-24Nb-0.5N and Ti-24Nb-0.5O alloys
P. CASTANY, A. RAMAROLAHY, F. PRIMA, P. LAHEURTE, C. CURFS, T. GLORIANT
Acta Materialia, vol 88, pp.102-111, 2015
Lien vers la publication

 

Formability of a magnesium alloy deformed under channel die compression tests : macroscopic shearing of specimens
H. FRANCILLETTE, F. MARCO
Key Engineering Materials, 651-653, pp.15-20, 2015

 

Characterization of the martensitic transformation in the superelastic Ti-24Nb-4Zr-8Sn alloy by in situ synchrotron X-ray diffraction and dynamic mechanical analysis
Y. YANG, P. CASTANY, M. CORNEN, F. PRIMA, S.J. LI, Y.L. HAO, T. GLORIANT
Acta Materialia, vol 88, pp.25-33, 2015
Lien vers la publication

 

Corrosion behaviour of Nitrogen-Implantation Ti-Ta-Nb alloy in physiological solutions simulating real conditions from human body
S.I. DROB, C. VASILESCU, P. DROB, A. VASILESCU, D.M. GORDIN, T. GLORIANT
JOM, The Journal of the Minerals, Metals &Materials Society (TMS), vol 67, number 4, pp.818-829, 2015
doi 10.1007/s11837-015-1351-6

 

In vitro performance assessment of a new beta Ti-Mo-Nb alloy compositions
P. NEACSU, D.M. GORDIN, V. MITRAN, T. GLORIANT, M. COSTACHE, A. CIMPEAN
Materials Science and Engineering C, vol 47, pp.105-113, 2015
Lien vers la publication

Multifunctional “gum metal” Titanium-Based Alloy: Its Long-Term Electrochemical Behavior and Macrophage Response
S.I. DROB, C. VASILESCU, J.M. CALDERON-MORENO, P. OSICEANU, P. NEASCU, A. CIMPEAN, D.M. GORDIN, T. GLORIANT 
Int. J. Electrochem. Sci 10, pp.10738-10755, 2015

Electrochemical characterization of Ti12Mo5Ta alloys in contact with saline medium
D. MARECI, R. CHELARIU, A. CAILEAN, F. BRINZA, G. BOLAT, D.M. GORDIN 
Trans. Nonferrous Met. Soc. China, 25, pp.345-352, 2015

Biological Behaviour and Enhanced Anticorrosive Performance of the Nitrided Superelastic Ti-23Nb-0.7Ta-2Zr-0.5N Alloy
V. MITRAN, C. VASILESCU, S.I. DROB, P. OSICEANU, J.M. CALDERON-MORENO, C. TABIRCA, D.M. GORDIN, T. GLORIANT, A. CIMPEAN 
BioMed. Res. Inter. 261802, 2015

Investigation of processing effects on the corrosion resistance of Ti20Mo alloy in saline solutions
G. BOLAT, J. IZQUIERDO, T. GLORIANT, R. CHELARIU, D. MARECI, R.M. SOUTO 
Corr. Sci. 98, pp.170-179, 2015

XRD and nanoindentation testing of thermo-mechanically processed Ti-29Nb-9Ta-10Zr alloy
I. CINCA, D. NOCIVIN, D. RADUCANU, T. GLORIANT, D.M. GORDIN, I. DAN, A. CAPRARESCU, V.D.COJOCARU 
Metall. Mater. 53, pp.17-26, 2015

 

Modelling the influence of pH, fluoride, and caffeine on the corrosion resistance of TiMo alloys by artificial neural networks developed with differential evolution algorithm
D. MARECI, E.N. DRAGOI, G. BOLAT, R. CHELARIU, D.M. GORDIN, S. CURTEANU
Materials and Corrosion, 2014

 

Long-term corrosion performances and cytocompatibility of nitrided Ti and Ti-6Al-4V alloy in severe functional conditions
R. ION, C. VASILESCU, P. DROB, E. VASILESCU, A. CIMPEAN, S.I. DROB, D.M. GORDIN, T. GLORIANT
Materials and corrosion, vol 65, issue 6, pp.593-604, 2014
Lien vers la publication

 

Metastable beta Ti-Nb-Mo alloys with improved corrosion resistance in saline solution
R. CHELARIU, G. BOLAT, J. IZQUIERDO, D. MARECI, D.M. GORDIN, T. GLORIANT, R.M. SOUTO
Electrochimica Acta, vol 137, pp. 280-289, 2014
Lien vers la publication

 

Potentiality of the “Gum Metal” titanium-based alloy for biomedical applications
D.M. GORDIN, R. ION, C. VASILESCU, S.I. DROB, A. CIMPEAN, T. GLORIANT
Materials Science and Engineering C, vol 44, pp.362-370, nov 2014
Lien vers la publication

Evaluation of developed texture during cold-rolling deformation of Ti-Nb-Ta-Zr biocompatible alloy
V.D. COJOCARU, I. THIBON, D. RADUCANU, I. CINCA, T. GLORIANT, D.M. GORDIN 
Key Eng. Mater. 592-593, pp.366-369, 2014

 

Recrystallization temperature influence upon structural changes of 90% cold rolled Ti-29Nb-9Ta-10Zr biocompatible alloy
C.M. TABIRCA, T. GLORIANT, D.M. GORDIN, I. THIBON, D. RADUCANU, I. CINCA, C.L. NAE, A. CAPRARESCU, V.D. COJOCARU 
Key Eng. Mater. 592-593, pp.370-373, 2014

 

An alternative way to orient the parent phase in the cubic/orthorhombic martensitic transformation of titanium shape memory alloys
E. BERTRAND, P. CASTANY, T. GLORIANT
Scripta Materialia, vol 83, pp.41-44, 2014
Lien vers la publication

 

Superelastic property induced by low temperature heating of a shape memory Ti-24Nb-0.5Si biomedical alloy
A. RAMALOHARY, P. CASTANY, P. LAHEURTE, F. PRIMA, T. GLORIANT
Scripta Materialia, vol 88, pp.25-28, 2014
Lien vers la publication

 

Determination of hardness and elastic modulus inverse pole figures of polycrystalline commercially pure titanium by coupling nanoindentation and EBSD techniques
C. FIZANNE-MICHEL, M. CORNEN, P. CASTANY, I. PERON, T. GLORIANT
Materials Science and Engineering A, vol 613, pp.159-162, 2014
Lien vers la publication

 

Improvement of Superelastic Performance of Ti-Nb Binary Alloys for Biomedical Applications
W. ELMAY, E. PATOOR, T. GLORIANT, F. PRIMA, P. LAHEURTE  
Journal of Materials Engineering and Performance, vol 23, issue 7, pp.2471-2476, 2014
Lien vers la publication

 

Development of characterization methods on U(Mo) powders for Material Testing Reactors (MTRs)
G. CHAMPION, R. BELIN, H. PALANCHER, X. ILTIS, H. ROUQUETTE, M. PASTUREL, V. DEMANGE, P. CASTANY, V. DORCET, O. TOUGAIT
Powder Technology, volume 255, (2014), pp. 29-35
Lien vers la publication

 

Texture investigation of the superelastic Ti-24Nb-4Zr-8Sn alloy
Y. YANG, P. CASTANY, M. CORNEN, I. THIBON, F. PRIMA, T. GLORIANT
Journal of Alloys and Compounds, volume 591, (2014), pp. 85-90
Lien vers la publication

 

In vitro bio-functional performances of the novel superelastic beta-type Ti-23Nb-0.7Ta-2Zr-0.5N alloy
R. ION, D.M. GORDIN, V. MITRAN, P. OSICEANU, S. DINESCU, T. GLORIANT, A. CIMPEAN
Materials Science and Engineering C, volume 35, (2014), pp. 411-419
Lien vers la publication

 

Structural investigation of thermo-mechanically processed Ti-29Nb-9Ta-10Zr alloy using X-ray diffraction
C.M. TABIRCA, D. RADUCANU, T. GLORIANT, D.M. GORDIN, V.D. COJOCARU, I. CINCA, I. DAN, A. CAPRARESCU
Journal of Optoelectronics and Advanced Materials, volume 15, issue 7-8, (2013), pp. 739-743

 

 

Investigation of early stage deformation mechanisms in a metastable beta titanium alloy showing combined TWIP and TRIP effects
F. SUN, J.Y. ZHANG, M. MARTELEUR, T. GLORIANT, P. VERMAUT, D. LAILLE, P. CASTANY, C. CURFS, P.J. JACQUES, F. PRIMA
Acta Materialia, volume 61, issue 17, (2013), pp. 6406-6417
Lien vers la publication

 

Effects of cold-rolling deformation on texture evolution and mechanical properties of Ti-29Nb-9Ta-10Zr alloy
V.D. COJOCARU, D. RADUCANU, T. GLORIANT, D.M. GORDIN, I. CINCA
Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, volume 586, (2013), pp. 1-10

 

 

Influence of equiatomic Zr/Nb substitution on superelastic behavior of Ti-Nb-Zr alloy
J. ZHANG, F. SUN, Y.L HAO, N. GOZDECKI, E. LEBRUN, P. VERMAUT, R. PORTIER, T. GLORIANT, P. LAHEURTE, F. PRIMA
Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, volume 563, (2013), pp. 78-85
Lien vers la publication

L

Texture in ultra-strength Ti-25Ta-25Nb alloy strips 
V.D. COJOCARU, D. RADUCANU, D.M. GORDIN, I. CINCA
Journal of Alloys and Compounds, Volume 576, (2013), pp. 170-176 
Lien vers publication

 

Design of a nitrogen-implanted titanium-based superelastic alloy with optimized properties for biomedical applications 
D.M.GORDIN, D.BUSARDO, A.CIMPEAN, C.VASILESCU, D.HÖCHE, S.I.DROB, V.MITRAN, M.CORNEN, T.GLORIANT
Materials Science and Engineering C, Volume 33, issue 7, (2013), pp. 4173-4182 
Lien vers publication

 

Effects of thermomechanical process on the microstructure and mechanical properties of a full martensitic titanium-based biomedical alloy
W.ELMAY, F.PRIMA, T.GLORIANT, B.BOLLE, Y.ZHONG, E.PATOOR, P.LAHEURTE
Journal of the Mechanical Behavior of Biomedical Materials, Volume 18, (2013), pp. 47-56
Lien vers publication

 

 

 

Investigation of the martensitic transformation and the damping behavior of a superelastic Ti-Ta-Nb alloy
E. BERTRAND, P. CASTANY, T. GLORIANT
Acta Materialia, volume 61, issue 2, (2013) pp. 511-518
Lien vers publication

 

 

 

Texture evolution during ARB (Accumulative Roll Bonding) processing of Ti-10Zr-5Nb-5Ta alloy
V.D. COJOCARU, D. RADUCANU, D.M. GORDIN, I. CINCA
Journal of Alloys and Compounds, Volume 546, (2013), pp. 260-269
Lien vers publication

 

 

 

 

Influence of quench rate and microstructure on bendability of AA6016 aluminium alloys
P. CASTANY, F. DIOLOGENT, A. ROSSOLL, J.-F. DESPOIS, C. BEZENÇON, A. MORTENSEN
Materials Science and Engineering A, Volume 559, (2013),  pp. 558-565
Lien vers publication

Formation of nano-sized grains in Ti-10Zr-5Nb-5Ta biomedical alloy processed by accumulative roll bonding (ARB)
I. CINCA,  D. RADUCANU, A. NOVICIN, D.M. GORDIN, V. D. COJOCARU 
Metallic Materials, 51, pp.165-172, 2013


Surface characterization and biocompatibility of titanium alloys implanted with nitrogen by Hardion+ technology
D.M. GORDIN, T. GLORIANT, V. CHANE-PANE, D. BUSARDO, V. MITRAN, D. HOCHE, C. VASILESCU, S.I. DROB, A. CIMPEAN
Journal of Materials Science : Materials in Medicine, Volume 23, issue 12, (2012) pp. 2953-2966
Lien vers publication

 

Long-term corrosion performances and cytocompatibility of nitride Ti and Ti-6Al-4V alloy in severe functional conditions
R. ION, C. VASILESCU, P. DROB, E. VASILESCU, A. CIMPEAN, S.I. DROB, D.M. GORDIN, T. GLORIANT
Materials and corrosion (2012) online
Lien vers publication

 

 

 

 

Experimental determinations of the titane alloy, Ti12Mo, behaviour, with biomedical application
N.CRISAN, A-M.TRUNFIO-SFARGHIU, M.D.GORDIN, G.STOICA, Y.BERTHIER, H.GHEORGHIU
UPB Scientific Bulletin, Series D: Mechanical Engineering, volume 74, n°2, (2012) pp. 121-134
Lien vers publication

 

 

 

 

Texture evolution in a Ti-Ta-Nb alloy processed by severe plastic deformation
V.D.COJOCARU, D.RADUCANU, T.GLORIANT
JOM, volume 64, Issue 5, may 2012, pp.572-581
Lien vers publication

 

 

 

 

On the design of new beta-metastable titanium alloys with improved work hardening rate thanks to simultaneous TRIP and TWIP effects
M. MARTELEUR, F. SUN, T. GLORIANT, P. VERMAUT, P. JACQUES, F. PRIMA
Scripta Mater, Volume 66, Issue 10, May 2012, Pages 749-752
Lien vers publication

 

 

 

 

Osteoblast cell behavior on the new beta-type Ti25Ta25Nb alloy
A. CIMPEAN, V. MITRAN, C.M. CIOFRANGEANU, B. GALATEANU, E. BERTRAND, D-M. GORDIN, D. LORDACHESCU, T. GLORIANT
Materials Science and Engineering C 32 (2012) pp.1554-1563
Lien vers publication

 

 

 

 

Interdiffusion in the f.c.c phase of Cu-Mn binary alloys
I.THIBON, A.GUILLOU, T.GLORIANT
Journal of Phase Equilibria and Diffusion, v 33, n 4 (2012), pp 303-309
Lien vers publication

 

 

 

 

Microstructure and mechanical behavior of superelastic Ti-24Nb-0.5O and Ti-24Nb-0.5N biomedical alloys
A. RAMAROLAHY, P. CASTANY, F. PRIMA, P. LAHEURTE, I. PÉRON, T. GLORIANT
Journal of the Mechanical Behavior of Biomedical Materials, vol 9 (2012), pp.83-90
Lien vers publication

 

 

 

 

An optimal forward extrusion device proposed for numerical and experimental analysis of materials tribological properties corresponding to bulk forming processes
A.GAVRUS, H.FRANCILLETTE, D.T.PHAM
Tribology International, 47 (2012) pp.105-121.
Lien vers publication

 

 

 

 

In situ TEM study of dislocation slip in a metastable beta Titanium alloy
P.CASTANY, M.BESSE, T.GLORIANT
Scripta Materialia, volume 66, (2012) pp.371-373
Lien vers publication

 

 

 

 

HEMA-Tested in biological environment for wear resistance
N.CRISAN, A-M.TRUNFIO-SFARGHIU, M.D.GORDIN, G.STOICA, H.GHEORGHIU
Materiale Plastice, volume 2012, 49, n°1, pp.73-76
Lien vers publication

 

 

 

 

Evaluating electrochemical behaviour of recrystallized titanium alloys in Ringer's solution
D. MARECI, R. CHELARIU, D. SUTIMAN, D.M. GORDIN, T. GLORIANT
Mater. Corr., 62 (2011) pp. 1117-1123
Lien vers publication

 

 

 

 

A thermo-mechanical treatment to improve the superelastic performances of biomedical Ti-26Nb and Ti-20Nb-6Zr (at%) alloys
F.SUN, Y.L.HAO, S.NOWAK, T.GLORIANT, P.LAHEURTE, F.PRIMA
Journal of the Mechanical Behavior of Biomedical Materials, volume 4, (2011), pp.1864-1872
Lien vers publication

 

 

 

 

Optimisation of mechanical properties of Ti-Nb binary alloys for biomedical applications
W.ELMAY, E.PATOOR, B.BOLLE, T.GLORIANT, F.PRIMA, A.EBERHARDT, P.LAHEURTE
Computer Methods in Biomechanics and Biomedical Engineering, volume 14, (2011), pp.119-120
Lien vers publication

 

 

 

 

The evaluation of mechanical properties for a Ti-Ta-Nb biocompatible alloy
V.D.COJOCARU, T.GLORIANT, D.M.GORDIN, E.BERTRAND, D.RADUCANU, I.CINCA, I.DAN
Journal of Optoelectronics and Advanced Materials, volume 13, (2011), pp.912-916
Lien vers publication

 

 

 

 

Microstructural characterization and recrystallisation kinetics of cold rolled copper
G.BENCHABANE, Z.BOUMERZOUG, T.GLORIANT, I.THIBON
Physica B- Condensed Matter, volume 406, (2011), pp.1973-1976
Lien vers publication

 

 

 

 

Mechanisms of deformation in Gum Metal TNTZ-O and TNTZ titanium alloys: A comparative study on the oxygen influence
M.BESSE, P.CASTANY,T.GLORIANT
Acta Materialia, volume 59, (2011) pp.5982-5988
Lien vers publication

 

 

 

 

Dislocation mobility in gum metal beta-Titanium alloy studied via in situ transmission electron microscopy
P.CASTANY, M.BESSE, T.GLORIANT
Physical Review B, volume 84, art : 020201 (2011)
Lien vers publication

 

 

 

 

Magnesium nitride phase formation by means of ion beam implantation technique
D.HOCHE, C.BLAWERT, M.CAVELLIER, D.BUSARDO, T.GLORIANT 
Appl. Surf. Sci. 257, (2011), pp.5626-5633
Lien vers publication

 

 

 

 

Twinning system selection in a metastable beta-Titanium alloy by Schmid factor analysis
E.BERTRAND, P.CASTANY, I.PERON, T.GLORIANT
Scripta Materialia, volume 64, (2011) pp.1110-1113
Lien vers publication

 

 

 

 

Preparation of H-bar cross-sectional specimen for in situ TEM straining experiments : A FIB-based method applied to a nitrided Ti-6Al-4V alloy
P.CASTANY, M.LEGROS
Materials Science and Engineering A, volume 528, (2011) pp.1367-1371
Lien vers publication

 

 

 

 

Synthesis and characterization of a new superelastic Ti-25Ta-25Nb biomedical alloy
E.BERTRAND, T.GLORIANT, D.M.GORDIN, E.VASILESCU, P.DROB, C.VASILESCU, S.I.DROB
J. Mech. Behav. Biomed. Mater. 3, (2010), pp.559-564  
Lien vers publication

 

 

 

 

Corrosion resistance of the new Ti-25Ta-25Nb  alloy in severe functional conditions
E.VASILESCU, P.DROB, C.VASILESCU, S.I.DROB, E.BERTRAND, D.M.GORDIN, T.GLORIANT
Mater. Corr. 61, (2010), pp 947-954
Lien vers publication

 

 

 

 

Mechanical properties of low modulus beta titanium alloys designed from the electronic approach
P.LAHEURTE, F.PRIMA , A.EBERHARDT, T.GLORIANT, M.WARY, E.PATOOR
J. Mech. Behav. Biomed. Mater. 3, (2010), pp.565-573
Lien vers publication

 

 

 

 

Effect of Mo content on electrochemical behaviour of TiMo alloys for dental applications
D.MARECI, R.CHELARIU, D.M.GORDIN, M.ROMAS, D.SUTIMAN, T.GLORIANT
Mater. Corr. 61, (2010), pp 829-837
Lien vers publication

 

 

 

 

Influence of a short thermal treatment on the superelastic properties of a titanium-based alloy
F.SUN, S.NOWAK, T.GLORIANT, P.LAHEURTE, A.EBERHARDT, F.PRIMA
Scripta Mater. 63, (2010) pp.1053-1056
Lien vers publication

 

 

 

 

Electrochemical aspects of Ti-Ta alloys in HBSS
D.MARECI, R.CHELARIU, G.CIURESCU, D.SUTIMAN, T.GLORIANT
Mater. Corr. 61, (2010), pp 768-774
Lien vers publication

 

 

 

 

High-strenght nanostructured Ti-12Mo alloy from ductile metastable beta state precursor
F.SUN, F.PRIMA, T.GLORIANT
Mater. Sci. Eng. A, 527, (2010) pp.4262-4269
Lien vers publication

 

 

 

 

Corrosion behaviour of some titanium dental alloys synthesized by cold crucible levitation melting
D.MARECI, R.CHELARIU, G.CIURESCU, D.SUTIMAN, D.M.GORDIN, T.GLORIANT
J. Optoelec. Adv. Mater. 12, (2010) pp.1590-1596
Lien vers publication

 

 

 

 

Elaboration of monophasic and biphasic calcium phosphate coatings on Ti6Al4V substrate by pulsed electrodeposition current
H.BENHAYOUNE, R.DREVET, J.FAURE, S.POTIRON, T.GLORIANT, H.OUDADESSE, D.LAURENT-MAQUIN
Adv. Biomater, 12, (2010) pp.B192-B199
Lien vers publication

 

 

 

 

Corrosion behaviour of a beta-Ti20Mo alloy in artificial saliva
D.MARECI, R.CHELARIU, I.DAN, D.M.GORDIN, T.GLORIANT
J. Mater. Sci.:Mater. Med 21, (2010), pp.2907-2913
Lien vers publication

 

 

 

 

U-Mo/Al-Si interaction : influence of Si concentration
J. ALLENOU, H. PALANCHER, X. LLTIS, M. CORNEN, O. TOUGAIT, R. TUCOULOU, E. WELCOMME, Ph. MARTIN, C. VALOT, F. CHAROLLAIS, M.C. ANSELMET, P. LEMOINE
Journal of Nuclear Materials, volume 399, 2-3, (2010) pp.189-199
Lien vers publication

 

 

 

 

Thermal analysis of the omega nanophase transformation from the metastable beta Ti-12Mo alloy
F.SUN, D.LAILLE, T.GLORIANT
J. Therm. Anal. Cal, 101 (2010) pp.81-88
Lien vers publication

 

 

Neutron Diffraction of U-(5,4-10 wt%)Mo Alloy powders prepared by Centrifugal Atomization
J.M. PARK, K. HWAN, D.B. LEE, Y.S. LEE, J.S. LEE, H.J. RYU, C.K. KIM, M. CORNEN
Journal of Nuclear Materials, volume 397, 1-3, (2010) pp.27-30
Lien vers publication

 

 

Microstructural characterization of nitrided beta Ti-Mo alloys at 1400 °C
D.M. GORDIN, I. THIBON, A. GUILLOU, M. CORNEN, T. GLORIANT, 
Materials Characterization, 61-3, (2010) pp 376-380 
Lien vers publication

 

 

Direct measurement of the variation the energy of a dislocation locked in specific orientations
J.DOUIN, P.CASTANY, F.PETTINARI-STURMEL, A.COUJON
Acta Materialia, vol 57 (2009), pp.466-473
Lien vers publication

 

 

Comparative corrosion study of Ti-Ta alloys for Dental applications
D. MARECI, R. CHELARIU, D.M. GORDIN, G. UNGUREANU, T. GLORIANT
Acta Biomaterialia, 5 (2009) pp.3625-3639
Lien vers publication

 

 

 

In vitro Chemical Reactivity of Doped Bioactive Glasses : an original approach by solid-state NMR Spectroscopy
E. DIETRICH, H. OUDADESSE, M. LE FLOCH, B. BUREAU, T. GLORIANT
Adv. Eng. Mater., 11-8 (2009) pp.B98-B105.
Lien vers publication

 

 

 

Electrochemical behaviour of a New Titanium alloy for Dental Applications
D. MARECI, R. CHELARIU, S. IVANESCU, D.M. GORDIN, I. CRETESCU, T. GLORIANT
Revista de chimie, 60-8 (2009) pp.787-793. 
Lien vers publication

 

 

 

Primary crystallization process of amorphous Al 88Ni6Sm6 alloy investigated by differential scanning calorimetry and by electrical resistivity
F. SUN, T. GLORIANT
J. Alloys and Compounds, 477-1/2 (2009) pp.133-138. 
Lien vers publication

 

 

 

Interdiffusion in beta-Ti–Zr binary alloys
I. THIBON, D. ANSEL, T. GLORIANT
J. Alloys and Compounds, 470-1/2 (2009) pp.127-133. 
Lien vers publication

 

 

Preliminary testing of corrosion behaviour of Ti6Al7Nb and Ti30Ta alloys in artificial saliva with additions of fluoride ions and lactic acid
D. MARECI, R. CHELARIU, I. CARCEA, D.M. GORDIN, T. GLORIANT
Métalurgia International, 13-12 (2008) pp.82-90

 

 

 

Characterization of Ti-Ta alloys synthesized by cold crucible levitation melting
D.M. GORDIN, E. DELVAT, R. CHELARIU, G. UNGUREANU, M. BESSE, D. LAILLÉ, T. GLORIANT
Adv. Eng. Mater., 10-8 (2008) pp.714-719. 
Lien vers publication

 

 

 

Microstructure, mechanical properties and cytocompatibility of stable beta Ti-Mo-Ta sintered alloys
E. DELVAT, D.M. GORDIN, T. GLORIANT, J.L. DUVAL, M.D. NAGEL
J. of the Mechanical Behavior of Biomedical Materials, 1-4 (2008) pp.345-351. 
Lien vers publication

 

 

 

Recrystallization of pure copper investigated by calorimetry and microhardness
G. BENCHABANE, Z. BOUMERZOUG, I. THIBON, T. GLORIANT
Materials Characterization, 59-10 (2008) pp.1425-1428. 
Lien vers publication

 

 

 

Unusual devitrification behaviour in rapidly solidified Ti45-Zr38-Ni17 alloy
H. LEFAIX, P. VERMAUT, D. JANICKOVIC, P. SVEC, T. GLORIANT, R. PORTIER, F. PRIMA
J. Alloys and Compounds, 460-1/2 (2008) pp.392-399.
Lien vers publication

 

 

 

Duplex nitriding treatment of a beta-metastable Ti94Mo6 alloy for biomedical applications
D.M. GORDIN, A. GUILLOU, I. THIBON, M. BOHN, D. ANSEL, T. GLORIANT
J. Alloys and Compounds, 457-1/2 (2008) pp.384-388.
Lien vers publication

 

 

 

Anisotropic behavior of a Ti-6Al-4V sheet during cold rolling: evidence of macroscopic shearing
H. FRANCILLETTE, M. BENMAOUCHE, N. GAUQUELIN
J. of Materials Processing Technology, 198 (2008) pp.86-92.
Lien vers publication

 

Characterization of nanophase precipitation in a metastable beta titanium-based alloy by electrical resistivity, dilatometry and neutron diffraction
T. GLORIANT, G. TEXIER, F. SUN, I. THIBON, F. PRIMA, J.L. SOUBEYROUX
Scripta Mater., 58-4 (2008) pp.271-274.
Lien vers publication